Skip to main content
Ctrl+K
Klippel Manuals - Home
Klippel Online Manuals
Go To Klippel Website
  • Hardware
    • Safety Advice
    • KLIPPEL Analyzer Hardware
    • Example Speaker
    • Micro Speaker Clamping
    • MUX – Multiplexer
    • NFS – Near Field Scanner Baffle - Assembly
    • NFS – Near Field Scanner - Assembly
    • Pro Driver Stand
    • Pro Driver Stand Locking Bolt Modification
    • SCN-NF – SCN Near Field Add-On - Assembly
    • Vacuum Stand
  • dB-Lab – Software
    • dB-Lab
  • QC – Quality Control
    • QC – Quality Control
    • ALD – Air Leak Detection
    • ALS – Air Leak Stethoscope
    • BAC – Balanced Armature Check
    • EQA – Equalization + Alignment
    • EXD – External Devices
    • IMP – Impedance
    • I/O & Prompt
    • LST – Linear Suspension Test
    • MSC – Motor and Suspension Check
    • MTD – Multi-Tone Distortion
    • PP – Post Processing Task
    • Preconditioning
    • SAN – Spectrum Analysis
    • SPL – Sound Pressure
    • SPL+IMP – Sound Pressure + Impedance
    • 3DL – 3D Limits
    • DCX – DC Measurement of Excursion
    • Feature Libraries
    • MSP – Match Speaker Tool
    • PNI – Production Noise Immunity
    • QC-VC – QC Verdict Collector
    • STAT – Statistics
    • SYN – External Synchronization
  • Transducer Parameter Identification Modules
    • BAC – Balanced Armature Check
    • IMP – Impedance
    • FLSI – Fast Large Signal Identification
    • LPM – Linear Parameter Measurement
    • LSI – Large Signal Identification
    • LSI3 – Large Signal Identification
    • MMT – Multipoint Measurement Tool
    • MSC – Motor and Suspension Check
  • Frequency Response & Distortion Modules
    • 3DL – 3D Limits
    • ALD – Air Leak Detection
    • ALS – Air Leak Stethoscope
    • DIS – Distortion
    • EQA – Equalization + Alignment
    • ISC – In-Situ Room Compensation
    • MTD – Multi-Tone Distortion
    • MTON – Multi-Tone Measurement
    • NRL – Nonlinear Residual Analyzer
    • PNI – Production Noise Immunity
    • SAN – Spectrum Analysis
    • SPL – Sound Pressure
    • SPL+IMP – Sound Pressure + Impedance
    • SYN – External Synchronization
    • TBM – Tone Burst Measurement
    • TRF – Transfer Function Measurement
  • Scanning Vibrometer & Part Measurement
    • BFS – B-Field Scanner
    • LST – Linear Suspension Test
    • MPM – Material Parameter Measurement
    • MSPM – Micro Suspension Part Measurement
    • Poly2SCN – Interface
    • RMA – Rocking Mode Analysis
    • SCN – Scanning Vibrometer
    • SPM – Suspension Part Measurement
  • Directivity & Room Correction
    • NFS – Near Field Scanner
    • SCN-NF – SCN Near Field Add-On
  • Simulation & Auralisation Modules
    • AUR – Auralization
    • LSIM – Linear Simulation
    • SIM – Simulation
    • SIM-AUR – Nonlinear Simulation and Auralization
  • Endurance Test
    • KET – Klippel Endurance Test
    • KET – Calibration
    • PWT – Power Test
  • KCS – Klippel Controlled Sound
    • KCS Monitor
    • KCS-ID – Parameter Identification
    • KCS Evaluation Tutorials
  • Tools
    • Automation
    • dB extract – Data Extraction
    • DOC – Documentation
    • Robotics
    • PPP – Programmable Post-Processing
    • STAT – Statistics
    • TFA – Time Frequency Analysis
    • Utilities
    • DCX – DC Measurement of Excursion
    • EXD – External Devices
    • Feature Libraries
    • I/O & Prompt
    • MSP – Match Speaker Tool
    • PP – Post Processing Task
    • Preconditioning
    • QC-VC – QC Verdict Collector
  • Contact and Support

Preconditioning

On this page

  • Preconditioning - Tutorial
  • Preconditioning - Reference

Preconditioning#

Preconditioning - Tutorial#

Please refer to QC Manual section Preconditioning.

Preconditioning - Reference#

Please refer to QC Manual section Preconditioning.

previous

PP – Post Processing Task

next

SAN – Spectrum Analysis

On this page
  • Preconditioning - Tutorial
  • Preconditioning - Reference

By Klippel GmbH

© Copyright 2026, Klippel GmbH.

沪ICP备2025150804号-1
苏公网安备32021302002815号